Advertisement
Figure 36
1. Full-width ramp in
stowed position
2. Side view of full-width
ramp in loading position
3. Not greater than
15 degrees
Towing the Machine
• Do not attach towed equipment except at the
hitch point.
• Follow the attachment manufacturer's
recommendation for weight limits for towed
equipment and towing on slopes. Towed
weight must not exceed the weight of the
machine, operator, and ballast; otherwise
hydrostatic transmission failure may occur. Use
counterweights or wheel weights as described in
the attachment manufacturer's manual.
g027996
4. Ramp is at least four
times (4X) as long as the
height of the trailer or
truck bed to the ground
5. H= height of the trailer or
truck bed to the ground
6. Trailer
• Never allow children or others in or on towed
equipment.
• On slopes, the weight of the towed equipment
may cause loss of traction, increased risk of
rollover, and loss of control. Reduce the towed
weight and slow down.
• Stopping distance increases with the weight of the
towed load. Travel slowly and allow extra distance
to stop.
• Make wide turns to keep the attachment clear of
the machine.
49
Operation
Advertisement
