Advertisement
Safety
This machine complies with the industry standard stability test in the static lateral and longitudinal tests with the
maximum recommended slope indicated on the decal. It is important that each operator review the slope operation
instructions in the operator's manual and review the conditions in which the machine is being operated to determine
if the machine may be operated in the conditions that day and on that site. Changes to terrain can result in a
1. Warning—read the Operator's Manual; do not operate this
machine unless you are trained; wear hearing protection.
2. Cutting and pinching hazard—keep hands and feet away
from moving parts; keep all guards and shields in place.
3. Thrown object hazard—keep bystanders away.
132-0871
change in slope operation for any machine.
4. Ramp hazard—when loading onto a trailer, do not use
5. Bodily harm hazard—do not carry passengers; look
6. Tipping hazard on slopes—do not use on slopes near
16
dual ramps; only use a singular ramp wide enough for the
machine and that has an incline less than 15 degrees;
back up the ramp (in reverse) and drive forward off the
ramp.
behind you when mowing in reverse.
open water; do not use on slopes greater than 15 degrees.
decal132-0871
Advertisement
