Diprint - Ricoh AP410 Network Manual

❖ ❖ ❖ ❖ DNS server address selection
msh> dhcp dnsaddr {dhcp |
static}
• Specify whether to obtain the
DNS server address from the
DHCP server or use the address
set by a user.
• To obtain the DNS server address
from the DHCP server, specify
"dhcp". To use the address set by
a user, specify "static".
❖ ❖ ❖ ❖ Domain name selection
msh> dhcp domainname {dhcp
| static}
• Specify whether to obtain the
domain name from the DNS
server or use the domain name
set by a user.
• To obtain the domain name from
the DHCP server, specify "dhcp".
To use the domain name set by a
user, specify "static".
Reference
For details about DHCP functions,
see p.137 "Using DHCP".
For details about setting the DNS
server address, see p.88 "dns".
For details about setting the do-
main name, see p.89 "domain-
name".
Remote Maintenance by telnet

diprint

The direct printing port enables direct
printing from a network-connected
computer.
Use t he " diprint " c omm a nd to
change direct printing port settings.
❖ ❖ ❖ ❖ View settings
The following command displays
the current direct printing port set-
tings:
msh> diprint
Example output:
port 9100
timeout=300(sec)
bidirect on
• The "port" specifies the port
number of the direct printing
port.
• The "bidirect" setting indicates
whether the direct printing port
is bidirectional or not.
❖ ❖ ❖ ❖ Setting timeout
msh> diprint timeout [30~
65535]
• You can specify the timeout in-
terval to use when the printer is
expecting data from the net-
work.
• The default is 300 seconds.
❖ ❖ ❖ ❖ Setting bidirect
msh> diprint bidirect { on
| off }
• You can specify whether the di-
rect printing port is bidirection-
al or not.
4
87