Configuring The Network Interface Board - Ricoh AP410 Network Manual

Configuring the Network Interface Board

Use the following command to display network interface board settings:
• telnet : Use the "show" command. See p.96 "show".
Item
Common
mode
Protocol Up/Down
appletalk
TCP/IP
netware
SMB
IP over 1394
SCSI print
Ethernet interface
Syslog priority
NVRAM version
Device name
Comment
location
Contact
Soft switch
appletalk
mode
Net
Object
Type
Zone
Understanding the Displayed Information
Description
[up] means "active" and [down] means "inactive".
Internal version number
Internal version number
Printer name
Comment
Location of the printer in the SNMP and Rendezvous in-
formation
Administrator information for the printer and contact
information in the SNMP information
AppleTalk protocol in selection
Network number
Macintosh printer name
Type of printer
Name of the zone that the printer belongs to
4
117