Ricoh AP410 Network Manual page 105

❖ ❖ ❖ ❖ SNMP v3 function configuration
msh> snmp v3 {on | off}
• Specify "on" to enable, and "off"
to disable.
❖ ❖ ❖ ❖ SNMP TRAP configuration
msh> snmp trap {v1 | v2 |
v3} {on | off}
• Specify "on" to enable, and "off"
to disable.
❖ ❖ ❖ ❖ Remote Configuration Authorization
configuration
msh> snmp remote {on |
off}
• Specify "on" to enable, and "off"
to disable.
❖ ❖ ❖ ❖ SNMP v3 TRAP configuration display
msh> snmp v3trap
msh> snmp v3trap {1- 5}
• If a number from 1-5 is entered,
settings are displayed for that
number only.
❖ ❖ ❖ ❖ Configuring a sending address for
SNMP v3 TRAP
msh> snmp v3trap {1-5}
{ip| ipx} "address"
Remote Maintenance by telnet
❖ ❖ ❖ ❖ Configuring a sending protocol for
SNMP v3 TRAP
msh> snmp v3trap {1-5} ac-
tive {ip/addr | ipx} {on |
off}
❖ ❖ ❖ ❖ Configuring a user account for SNMP
v3 TRAP
msh> snmp v3trap {1-5} ac-
count "account_name"
• Enter an account name using up
to 32 alphanumeric characters.
❖ ❖ ❖ ❖ Deleting an SNMP v3 TRAP user ac-
count
msh> snmp v3trap {1-5}
clear account
❖ ❖ ❖ ❖ Configuring an SNMP v3 encryption
algorithm
msh> snmp v3auth {md5 |
sha1}
❖ ❖ ❖ ❖ Configuring SNMP v3 encryption
msh> snmp v3priv {auto |
on}
• Set "auto" for automatic encryp-
tion configuration
• Set "on" for mandatory encryp-
tion configuration.
4
99