Table of Contents
Advertisement
Setting Up the Printer
H
Insert the finisher tray into the
hole of the finisher (A A A A ).
2
I
Attach the two stoppers to the
lower of the finisher output tray
to lock the tray.
J
Remove the adhesive tape hold-
ing the finisher and cable and
packing material, and attach the
connector to the socket on the
bridge unit.
38
Note
❒ After installing all options, print
a configuration page to confirm
the installation. If the new de-
vice is listed in the column of
configuration options, then it
has been properly installed. For
more information, see P.54
"Printing a Configuration Page".
Installing CS370 (Mailbox)
ZDEP320E
R CAUTION:
• When lifting the machine, use
the grips on both sides. The ma-
chine could break or cause an in-
jury if dropped.
Note
❒ If you install the mailbox, the inter-
change unit must be installed first.
❒ If you install the mailbox and the
paper feed unit, the paper feed
unit is recommended to be in-
ZDEP330E
stalled first.
A
Confirm that the box contains the
following items.
ZDEP340E
1.
Mailbox trays (4 pcs)
2.
Screws (2 pcs)
• Output tray number seal
• Installation Guide
1
2
ZAEP383E
Advertisement
Table of Contents
