Table of Contents
Advertisement
Installing Interchange Unit
Type 280
A
Confirm that the box contains the
following item.
• Installation Guide
B
Turn off the printer, and remove
all cables and cords from the
printer.
C
Remove the adhesive tape and the
packing materials.
D
Open the right cover of the print-
er by lifting the catch.
E
Open the upper right cover by
lifting the handle.
F
Press the upper right cover in the
direction as shown in the illustra-
tion (A A A A ), and remove the upper
right cover (B B B B ).
Note
❒ The upper right cover is no
longer required.
ZAEP400E
G
Use a coin to remove the screw
from the upper cover of the print-
er.
Note
❒ The removed screw is no longer
ZAEP140E
required.
Installing Options
2
ZAEP630E
ZAEP150E
ZAEP640E
25
Advertisement
Table of Contents
