KERN FCB 6K-5 Operating Instructions Manual page 40

2. Parts counting

Use the
setting see chap. 9.5).
40
 Enter piece weight, numerical input
see chap. 3.2.2, the active digit flashes.
 Acknowledge by ➔ button.
The balance is now in piece counting mode counting all
units on the weighing plate.
 If necessary, put on and tare the weighing container.
 Fill the counting quantity. The piece quantity is shown di-
rectly in the display.
to switch between piece quantity and weight display (standard
TFCB-A-BA-e-2312