Advertisement
9.5 Change-over button and F button (standard settings)
The change-over button
The following functions are set as per standard (<default>) in the different
weighing applications:
Weih
count
check
Weih
count
check
For more setting options please see the setup menu under < buttons >,
see chap. 14.3.1.
The standard settings (<default>) for the <Weighing> application are described
below.
26
and the F button can be allocated with different functions.
Short key pressing
➢ When pressed for first time:
Setting weighing unit
➢ Switch-over between the
weighing units
➢ When pressed for first time:
Setting the reference quantity
➢ Switch-over between the
weighing units
➢ When pressed for first time:
Setting weighing unit
➢ Switch-over between the
weighing units
Short key pressing
➢ Open PRE-TARE settings
➢ Setting the reference quantity
➢ Open settings for check-
weighing
Long key pressing
➢ Display gross weight value
➢ When the balance has been tared
and the weighing unit is displayed,
you can change the display
between gross weight, net weight
and tare weight by pressing the
button long time.
➢ When the balance has been tared
and the weighing unit is displayed,
you can change the display
between gross weight, net weight
and tare weight by pressing the
button long time.
Long key pressing
➢ Carry out Data-Hold function
No function assigned
➢ Open settings for target weighing
TFCB-A-BA-e-2312
Advertisement
