Connecting The Printer; Network Connection - Ricoh Aficio SPC220N Hardware Manual

3. Connecting the Printer

Network Connection

Follow the procedure below to connect the printer to the computer through the
network. Prepare a hub, straight-through Ethernet cable, and any other neces-
sary network devices before connecting the 10BASE-T or 100BASE-TX cable to
the printer's Ethernet port.
R CAUTION:
• Connect only an approved network interface board to this printer. A voltage
over load can occur if you connect an incorrect network interface board,
such as a telephone line interface, to the printer. Voltage overloads can
cause fire, electric shock, and burns. Doing so may result in fire, electric
shock, or injury.
Important
❒ Use shielded Ethernet cable. Unshielded cables create electromagnetic inter-
ference that could cause malfunctions.
❒ The Ethernet cable is not supplied with this printer. Select your cable accord-
ing to the network environment.
A
Remove the cable cover.
B
Connect the Ethernet cable to the Ethernet port.
ASH090S
ASH052S
19