Ieee 802.11B (Wireless Lan) Configuration - Ricoh Aficio SP4100N Hardware Manual

IEEE 802.11b (Wireless LAN) Configuration

Configure the printer to use IEEE 802.11b (Wireless LAN). The following table shows the control panel
settings and their default values. These items appear in the [Host Interface] menu.
Setting Name
Comm. Mode
Channel
Trans. Speed
SSID
Security Method
• To use IEEE 802.11b (Wireless LAN), set as the followings using the control panel: press the [Menu]
key, and then select [Host Interface], [Network Setup], [LAN Type], and then [IEEE 802.11b]. Also,
set the IPv4 Address, Subnet Mask, Gateway Address, DHCP, Frame Type (NW), and Active Protocol
under the [Network Setup] menu. For details about setting items, see p.53 "Ethernet
Configuration".
• The 802.11b interface unit cannot be used simultaneously with a standard ethernet interface.
1. Press the [Menu] key.
The [Menu] screen appears.
IEEE 802.11b (Wireless LAN) Configuration
802.11 Ad hoc
(1-13) 13
(1-11) 11
Auto
blank
None
AUB051S
Default Value
4
61