Ricoh Aficio SP4100N Hardware Manual page 38

2. Installing Options
• After finishing installation, you can check the IEEE 802.11b interface unit is properly installed: Print
the configuration page from the [List/Test Print] menu. If it is installed properly, "IEEE 802.11b" will
appear for "Device Connection" on the configuration page.
• If the IEEE 802.11b interface unit is not installed properly, reinstall it following this procedure. If you
cannot install it properly even after attempting reinstallation, contact your sales or service
representative.
2
• You need to make settings with the control panel before using the IEEE 802.11b interface unit. For
more information, see "IEEE 802.11b (Wireless LAN) Configuration".
• "Printing the Test Page", Quick Installation Guide.
• p.61 "IEEE 802.11b (Wireless LAN) Configuration"
36