Using A Program - Ricoh Aficio 3224C Operating Instructions Manual

Simplifying the Operation
D D D D
Select the program number you
want to delete.
E E E E
Press [Yes].
Note
❒ Press [No] not to delete the pro-
gram. The display returns to
that of step
F F F F
Press [Exit].
The standby display appears.

Using a Program

7
Note
❒ Using the program causes the pre-
vious settings to be cleared.
❒ If you have no programmed desti-
nations or scan settings as pro-
grams, select the program number,
and then enter the fax number of
the destination and select the scan
settings you require.
❒ This section is based on the pro-
gram registered in "Example of
registering a program using Send
L a t e r w i t h t h e f a x n u m b e r
01234456789". See p.128 "Example
of registering a program using
Send Later with the fax number
"0123456789"".
130
C
.
A A A A
Make sure that the machine is in
facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the { { { { Facsimile} } } }
key.
B B B B
Place the original.
C C C C
Press the { { { { Program} } } } key.
D D D D
Confirm that [Recall] is selected,
and press the registered program
No.
The standby display appears.
Then, the programmed fax num-
ber is shown. Transmission Mode
is selected.
E E E E
Press the { { { { Start} } } } key.
The fax number of the example
and specified time are shown on
the display, and the machine starts
to scan the original.
Transmission starts at the specified
time.
ZLFS310N