If You Cannot Make Copies As You Want - Ricoh Aficio 240W Copy Reference Manual

If You Cannot Make Copies As You Want

This section explains causes of, and solutions for, unexpected copy results.
Problem
Misfeeds occur frequently.
Images are cropped when us-
ing Erase Border.
Parts of the image are not cop-
ied.
Copies are blank.
Copies shift sideways.
Causes
The size of paper is different
to that of the tray.
Jammed or torn paper is in-
side the machine.
The paper is curled.
The Erase Border setting is too
big.
The margin of the original is
too small.
The original is not placed cor-
rectly.
An improper size of paper is
selected.
Shift or Margin Adjustment
mode is selected.
The original is not set correct-
ly.
The paper roll is not set cor-
rectly.
The original does not match
the size in the original table
setting.
The paper is not set correctly
in the bypass tray.
If You Cannot Make Copies As You Want
Solutions
Adjust the tray to the size of
paper.
Remove the paper. See
"xClearing Misfeeds", Gener-
al Settings Guide.
Smooth out the curl and try
again.
Reduce the size of the Erase
Border setting. See p.45 "Erase
Border".
Place the original correctly.
See p.16 "Placing Originals".
Select the proper paper. See
"Copy Paper", General Set-
tings Guide.
Cancel Shift or Margin Ad-
justment mode. See p.43
"Margin Adjustment" and
p.44 "Shift".
Place the original with the sur-
face to be copied on face
down.
Set the paper roll correctly,
making sure it is straight and
not loose. See "CLoading Pa-
per Roll", General Settings
Guide.
Adjust the original guides to
the specified size, and then in-
sert the original along the
guides. See p.16 "Placing
Originals".
Make sure the paper size
matches the bypass tray
guides. See p.26 "Copying
from the Bypass Tray".
DRAFT 2003/11/12
3
75