Troubleshooting
Problem
Streaks, scratches, or wrinkles
appear in areas of solid black.
Shadows appear on the cop-
ies.
Copies are blurred.
3
74
Causes
Copy paper has been changed
from plain to translucent pa-
per, or from translucent to
plain paper.
The original is two-sided, or
the image density setting is
too dark.
Continuous copies have been
made on small sized paper.
Solutions
After switching from plain to
translucent paper, wait one
minute. After switching from
translucent to plain paper,
wait two minutes before mak-
ing copies.
Adjust the image density set-
ting. See p.30 "Adjusting
Copy Image Density".
Wait about two minutes, and
then try copying again.
DRAFT 2003/11/12