Setting Folded Originals (The Original Switching Lever); Setting Rolled Originals - Ricoh Aficio 240W Copy Reference Manual

Basics
Note
❒ Align the original with the fold
of the carrier sheet.
B B B B
1
Using both hands, hold the origi-
nal copy side down, and carefully
insert the folded edge of the carri-
er sheet into the insertion area.
Setting Folded Originals (the
Original Switching Lever)
When setting folded originals such as
drawings, you can make copies with
the fold lines erased.
Limitation
❒ Originals thicker than 157 g/m
(41.8 lb.) cannot be used.
A A A A
Move the original switching le-
vers at both sides of the machine
to the front.
18

Setting Rolled Originals

When setting rolled originals, you
can make copies using the lower out-
put auxiliary guide.
A A A A
Pull the lower output auxiliary
guide out and forward.
ABB534S
B B B B
Place the rolled original on the
lower output auxiliary guide.
C C C C
Pull the leading edge of the origi-
nal up to the original table, and
then adjust the original guides to
the paper width.
D D D D
Using both hands, carefully insert
the original between the original
2
guides, copy side to down.
Note
❒ Do not apply excessive force to
the lower ou tput auxiliary
AAJ539S
guide.
DRAFT 2003/11/12
AAJ537S
AAJ538S