Ricoh Aficio 240W Copy Reference Manual page 86

Troubleshooting
Problem
Copies shift in the direction of
the original feed (or opposite)
direction.
Copies are shorter than the se-
lected size, or cut off before
the end.
Wrinkles appear on the copy.
3
Copies are slanted.
Original and copy size does
not match.
You cannot combine several
functions.
76
Causes
Shift or Margin Adjustment
mode is selected.
The paper is damp.
The paper is damp. See "Anti-
humidity Heater Switch",
General Settings Guide.
The original is not straight.
Dampness can cause paper to
stretch.
The selected functions cannot
be used together.
Solutions
Cancel Shift or Margin Ad-
justment mode. See p.43
"Margin Adjustment" and
p.44 "Shift".
Replace the paper with new
paper.
Cut the paper to 1000 mm
(40") just before copying.
Turn on the anti-humidity
heater. See "Anti-humidity
Heater Switch", General Set-
tings Guide.
Insert the original along the
original guides, so it is
straight.
Adjust the Fine Magnification
setting for Additional Copy.
See p.21 "Fine Directional
Magnification (Additional
Copies Only)".
Adjust the Fine Magnification
setting. See "Fine Ratio:Copi-
er", General Settings Guide.
Check the combination of set-
tings, and set again. See p.104
"Combination Chart".
DRAFT 2003/11/12