Placing Originals - Ricoh Aficio 1515 Facsimile Reference Manual

Placing Originals

You can set your originals either in
the Document Feeder or on the expo-
sure glass. Some types of originals are
unsuitable for the Document Feeder
so they must be set on the exposure
glass.
Which way you place your original
depends on its size and whether you
are using the Document Feeder or the
exposure glass.
How to place A4, B5 JIS (Japanese
Industrial Standard), A5, 5
1
and 8 / " 11" size originals
2
AAN055S.eps
Original
Exposure glass
*1
*2
Note
When you place originals as
shown in the above illustration,
the fax header will be printed on
the received faxes at the destina-
tion as follows:
• *1 On the top of the fax
• *2 On the left side of the fax
1 1
/ " 8 / "
2 2
Where original is placed
For ADF
AAN055S
1
How to place A5, 5 /
2
JIS size originals
AAN056S.eps
Where original is placed
Original
Exposure glass
*2 *3
*1
Note
When you place originals as
shown in the above illustration,
the fax header will be printed on
the received faxes at the destina-
tion as follows:
• *1 On the top of the fax
• *2 On the left side of the fax
• *3 When the scanning size is set
1
to A4L or 8 / " 11"L on the
2
original size specifying display.
When sending a fax, the image
output at the other end depends on
the size and orientation of paper
used in the receiver's terminal. If
the receiver does not use paper of
the same size and orientation as
that of the original, the fax image
may be reduced in size, trimmed at
both edges, or divided into two or
more sheets. When sending an im-
portant original, we recommend
you ask the receiver about the size
and orientation of the paper used
in their terminal.
Placing Originals
1
" 8 / " and B5
2
For ADF
AAN056S
13
2