Atomic Time - La Crosse Technology CA73453B Setup Manual

Settings Menu Order:
• Language English | French | Spanish
• Beep ON | OFF
• Atomic ON | OFF
• DST ON | OFF
• Time Zone
• Hour
• Minutes
• Year
• Month
• Date
• Celsius | Fahrenheit

ATOMIC TIME

• Optional:
Press and release the SET button to manually start or stop a search for the
WWVB Atomic Time Signal.
• The Tower Icon
station is engaged to search for the signal over the next 12 to 24 hours. The icon will
remain solid on screen when the WWVB Signal is received.
• When your time and date are manually set correctly, your station will automatically
search for the Atomic Time Signal at UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• For information about WWVB Atomic Time visit: bit.ly/atomic_time
Disclaimer:
The Atomic Time Signal originates in Ft. Collins Colorado and has a range of
roughly 4800 kilometers (3000 miles). In some cases, the signal is affected by weather
conditions, geographic location. dwelling construction materials or electrical
interferences. The position of the station in the home may result in poor reception. If the
station has not synchronized to the correct time within a few days of activation, you may
need to move the station to a different location. It is best to position the station near an
exterior wall that faces toward Colorado. If the Atomic Time Signal is NOT received,
your station will still operate as a reliable accurate time keeper and should not be
considered broken.
Notes:
Language:
menu items as well as your full weekday readout.
Atomic OFF:
directly to the Hour Time setting.
Weekday:
Date are set.
will flash for about one minute while searching which means the
The language selected in this menu will control other
When Atomic OFF is selected, you will move
Will set automatically when your Year, Month, and
Time Zones
ALT = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacific
AKT = Alaska
HAT = Hawaii
3