Settings Menu - La Crosse Technology CA73453B Setup Manual

POWER UP
1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert 2-AA batteries Into your Station.
3. Use the instructions below to enter the Settings Menu to adjust your time, date,
and time zone. This will ensure your station searches for the Atomic Time Signal at
optimal times.
4. Once the sensor is reading to your station, place the sensor outside in a
shaded location. View our sensor mounting video here:
bit.ly/th_sensor_mounting

SETTINGS MENU

To Set the Time Manually:
1. Hold the SET
and release the
2. Press and release the
or exit the menu.
3. Press and release the
Outdoor Sensor
TX141-Bv4
AA
AA
button until the display changes to enter the Settings Menu. Press
+ or - buttons to adjust values by one. Hold to adjust quickly.
SET button to confirm values and move to the next setting
SNOOZE button at any time to exit.
Station
CA73453B
2