Table of Contents
Advertisement
③
Adjust position of the truck, placing it in front of place where goods locate
④
Slowly start the truck, and insert fork arms to the bottom of goods as deeply as possible
⑤
Press the lifting button, raising forks to a position with a distance of over 40mm between bottom of the
pallet and ground
⑥
Start the truck and carry the goods to destination. Press lowering button and put the goods on the
ground, making the forks totally out of the bottom of the pallet. Then backward the truck slowly
Ⅴ.
Usage, maintenance and charge of storage battery
When it is necessary to conduct charging, please refer to the following operation methods:
1. Pull down the general power switch
2. Connect the charging plug of storage battery to output connector of charger
3. Then link the input connector of charger to AC power system
4. Turn on the charger, and it starts to charge after several seconds.
Warning
Hydrogen is aggregated in the battery box when charging. For this reason, the
charging condition shall be good ventilated. In avoidance of explosion and fire
disaster, open flame is forbidden.
14
；
Schematic diagram of charging method
；
；
；
Advertisement
Table of Contents
