Table of Contents
Advertisement
another direction. Likewise, the truck will speed up with the increasing of rotation amplitude of the
knob.
3)
Horn button： Horn of the truck will be turned on if you press the button.
4)
Emergency reverse button: when the operation handle is placed in area B and the emergency
reverse button is pressed, the truck will travel in an opposite direction away from the operator
immediately. This is a safety switch which can avoid the operator from being squeezed under
unexpected condition.
5)
Slow-down button: When this button is pressed, the truck will travel at an extremely slow speed.
This button is applicable for operation on especially narrow field or on the condition that the truck
needs to be accurately located.
6)
Electric lock： It is used to control switching-on and switching-off of main power supply of the truck.
Key of the electric lock shall be kept by the truck driver or personnel who have been specially
assigned. Be sure to cut off the main power supply when you leave the truck, and take the key of
electric lock, for fear occurrence of accident due to operation carried out by others.
7)
Power switch：It is used to control emergency power-off of the truck. Pulling up the switch, then
main power supply will be cut off, and inserting down represents switching-on. If your truck were
out of control due to some reason, please immediately pull up the switch to cut off power supply
for sake of any occurrence of accident.
As for the operation button on operation handle and handrail control case, the same
buttons have the same control function, which is convenient for easy operation.
Ⅲ. Safety Norms：
Warning
Please pay attention to the following items first before operation of the truck:
This electric truck is only limited to utilization indoor with a hard flat floor. Operation in inflammable,
⑴
explosive environment or corrosive environment such as acid or alkaline condition shall be strictly
forbidden.
Only drivers who have received formal training or are authorized can be allowed to drive the truck.
⑵
Read this instruction carefully before operation so as to master the performance of the truck; check
⑶
the truck whether it is in its normal condition before each operation. It is forbidden to use faulty truck;
repair by untrained persons is forbidden as well.
Overloading operation is forbidden.
⑷
As for goods carrying and operation, center of gravity of the goods must be within range of the two
⑸
forks. It is forbidden to transport loose goods.
The truck shall travels slowly when forks pass in or out of pallet.
⑹
It is strictly forbidden to press the lifting or lowering button during the traveling of the truck.
⑺
Meanwhile, don't switch lifting and lowering buttons rapidly or frequently, because rapid and frequent
lifting or lowering will cause damage to the truck and goods.
Don't load heavy goods on the forks rapidly.
⑻
Don't lay the goods on the truck for a long time!
⑼
7
Advertisement
Table of Contents
