Input Panel - REVELL Performa C52 Owner's Manual

placement.

INPUT PANEL

Figure 4: C52 Loudspeaker (Rear View)
On Top Of
Monitor
Flush Stand
Mounted Mounted
Placement
Compensation
Low Frequency Input
The numbers in Figure 4 (shown here) correspond
with the numbered items in the "Input Panel"
section that begins on this page.
The numbers in Figure 4 (below) correspond
with the numbered items in this section.
1. Placement Compensation
Switch
Optimizes the C52's response to different
loudspeaker placements. Refer to the
"Loudspeaker Placement" section for
more information.
• Select the Flush Mounted setting if
the C52 is placed in a bookcase or
wall unit.
• Select the On Top of Monitor
Flush
Mounted
0
-.5
+.5
-1 +1
High Frequency
Level (dB)
Remove straps
for bi-wire
or bi-amp High Frequency Input
Revel
Northridge, California
Assembled in U.S.A.
Serial No.
Low Frequency Input
1
Input Panel
On Top Of
Monitor
Stand
Mounted
Placement
Compensation
Remove straps
for bi-wire
or bi-amp High Frequency Input
Revel
Northridge, California
Assembled in U.S.A.
Serial No.
setting if the C52 is placed on top
of a video monitor or mounted on
a shelf.
• Select the Stand Mounted setting if
the C52 is placed on a stand (such
as the optional pedestal stand).
Note
Rotating the Placement Compensation
switch clockwise increases low-frequency
output.
REVEL Performa C52
OWNER'S MANUAL
2
0
-.5 +.5
-1 +1
4
High Frequency
Level (dB)
3
4
9