Table of Contents
Advertisement
MIDRANGE
The 4-inch (102 mm) midrange features:
• 1-inch (25.4mm) diameter voice coil on a glass-reinforced
®
Kapton
former for extraordinary power handling and freedom
from distortion.
• Ceramic-composite cones feature an optimum combination
of stiffness and low mass for low coloration and distortion, and
fully-pistonic operation throughout its entire operating range.
• Specially-shaped, synthetic and natural butyl-rubber composite
surround contributes to low coloration and distortion.
• Die-cast basket to eliminate coloration from resonances.
TWEETER
The 1-inch (25.4mm) tweeter features:
• A pure titanium dome for fully-pistonic operation.
• Integrated, cast heat sink for high-power handling and low
dynamic compression.
• Telar 57
, low-carbon high-saturation steel pole, backplate,
™
and top plate for low distortion.
CROSSOVER NETWORK
The Revel Performa C50a crossover network is designed to seam-
lessly integrate the transducers over a wide listening area, and to
compensate for a wide range of listening environments. The
crossover features:
• A 3-way, high-order crossover at 260Hz and 2.1kHz for high
power handling, optimized dispersion, and freedom from
distortion and dynamic compression.
• Individual calibration to match each Revel Performa C50a to
the original reference standard.
• 3-position placement compensation switch for low coloration
under a wide range of conditions.
• Calibrated, five-position, high-frequency level control for
accurate, repeatable settings.
• Separate woofer, midrange, and tweeter crossover boards to
eliminate any distortion-causing interaction.
REVEL PERFORMA C50a
Owner's Manual
5
Advertisement
Table of Contents
