Table of Contents
Advertisement
Light pattern
2,7
3,1
3,2
3,3
3,4
Camera status light: Indicates whether the camera is in use.
•
Solid white – Camera is in use.
•
Off – Camera is not in use.
Caps Lock status light: Indicates whether Caps Lock is enabled or disabled.
•
Solid white – Caps Lock enabled.
•
Off – Caps Lock disabled.
Flea power release
Flea power is the residual static electricity that remains on the computer even after it has been powered off and the battery has been
removed. The following procedure provides the instructions on how to conduct flea power release:
1
Turn off your computer.
2
Remove the
base
cover.
3
Press and hold the power button for 15 seconds to drain the flea power.
4
Replace the
base
cover.
5
Turn on your computer.
Wi-Fi power cycle
If your computer is unable to access the internet due to Wi-Fi connectivity issues a Wi-Fi power cycle procedure may be performed. The
following procedure provides the instructions on how to conduct a Wi-Fi power cycle:
NOTE:
Some ISPs (Internet Service Providers) provide a modem/router combo device.
1
Turn off your computer.
2
Turn off the modem.
3
Turn off the wireless router.
4
Wait for 30 seconds.
5
Turn on the wireless router.
6
Turn on the modem.
7
Turn on your computer.
Problem description
LCD failure
CMOS battery failure
PCI/video card failure
Recovery image not found
Recovery image found but invalid
Troubleshooting
75
Advertisement
Table of Contents
