Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
cover.
2
Remove the battery.
3
Remove the
coin-cell
battery.
4
Remove the
wireless
card.
5
Remove the
display
assembly.
6
Remove the
I/O
board.
7
Remove the
power button with fingerprint
8
Remove the
solid-state
drive.
9
Remove the
heat
sink.
10
Remove the fan.
11
Remove the
system
board.
Procedure
1
Peel off the two adhesive tapes that secure the touchpad to the keyboard bracket.
2
Remove the 27 screws (M1.4x2) that secure the keyboard bracket and the keyboard to the palm-rest assembly.
3
Lift the keyboard bracket off the keyboard.
4
Remove the six screws (M1.2x1.5) that secure the keyboard to the palm-rest assembly.
5
Lift the keyboard off the palm-rest assembly.
56
Removing the keyboard
computer. After working inside your computer, follow the instructions in
reader. (if installed)
Removing the keyboard
www.dell.com/
33
After working inside
Advertisement
Table of Contents
