Table of Contents
Advertisement
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Ensure that the battery cable is connected to the system board.
2
Align the tabs on the base cover with the slots on the palm-rest assembly and snap the base cover into place.
12
Replacing the base cover
Replacing the base cover
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
4
Advertisement
Table of Contents
