Dell P83G Service Manual page 68

System Configuration
Enable External USB Port
USB PowerShare
Audio
Keyboard Illumination
Keyboard Backlight with AC
Miscellaneous Devices
Enable Camera
Enable Secure Digital (SD) Card
Table 5. System setup options—Video menu
Video
LCD Brightness
Table 6. System setup options—Security menu
Security
Admin Password
System Password
Internal HDD-2 Password
Strong Password
Password Configuration
Password Bypass
Password Change
Non-Admin Setup Changes
UEFI Capsule Firmware Updates
PTT Security
Computrace(R)
CPU XD Support
Admin Setup Lockout
Master Password Lockout
68 System setup
Enable or disable booting from USB mass storage devices connected to external USB
port.
Enable or disable charging external devices through the USB PowerShare port.
Enable or disable the integrated audio controller.
Configures operating mode of the keyboard illumination feature.
Enable or disable Keyboard Backlight with AC.
NOTE: This option does not affect Keyboard Illumination.
Enable or disable various onboard devices.
Enable or disable the camera.
Enable or disable the SD card.
Set the panel brightness independently for battery and AC power.
Set, change, or delete the administrator password.
Set, change, or delete the system password.
Set, change, or delete the system's internal hard-disk drive password.
Enable or disable strong passwords.
Control the minimum and maximum number of characters allowed for Admin and
System passwords.
Bypass the System (Boot) Password and the internal HDD password prompts during
a system restart.
Enable or disable changes to the System and Hard Disk passwords when an
administrator password is set.
Enable or disable changes to the setup options when an administrator password is
set.
Enable or disable BIOS updates through UEFI capsule update packages.
Enable or disable Platform Trust Technology (PTT) visibility to the operating system.
Enable or disable the BIOS module interface of the optional Computrace(R) Service
from Absolute Software.
Enable or disable the Execute Disable mode of the Processor.
Enable to prevent users from entering Setup when an Admin Password is set.
Enable to disable master password support.
NOTE: Hard Disk passwords need to be cleared before the setting can be
changed.