Support - Axis Q8685-E User Manual

AXIS Q8685-E PTZ Network Camera
About system options
Note
A restart clears all entries in the Server Report.
Click Restore to reset most settings to the factory default values. The following settings are not affected:
• the boot protocol (DHCP or static)
• the static IP address
• the default router
• the subnet mask
• the system time
• the IEEE 802.1X settings
Note
If the Axis product is restored, uploaded applications and their settings are removed.
Click Default to reset all settings, including the IP address, to the factory default values. This button should be used with caution. The
Axis product can also be reset to factory default using the control button, see How to reset to factory default settings on page 62.
For information about firmware upgrade, see How to upgrade the firmware on page 64.
How to clean the wiper blade
NOTICE TICE
NO NO TICE
• Make sure the product is not in operation during cleaning.
• Do not stretch the wiper spring extensively when cleaning the wiper blade.
1. Clean the wiper blade using a mild cleaning agent.
2. Carefully adjust the wiper so that the wiper blade is positioned against the front window, and can clean it properly.
If necessary, change the wiper blade as instructed in its Installation Guide

Support

Support Overview
The System Options > Support > Support Overview page provides information on troubleshooting and contact information,
should you require technical assistance.
See also Troubleshooting on page 64.
System Overview
To get an overview of the Axis product's status and settings, go to System Options > Support > System Overview. Information
that can be found here includes firmware version, IP address, network and security settings, event settings, image settings
and recent log items.
Logs & Reports
The System Options > Support > Logs & Reports page generates logs and reports useful for system analysis and troubleshooting. If
contacting Axis Support, please provide a server report with your query.
System Log - Provides information about system events.
61