Connecting To Wlan Via The Wps-Function; Wps-Function; Connecting Wlan Automatically Via The Wps Function; Selecting The Wlan Manually And Conneting Via Wps - T+A MP 2500 R User Manual

Connecting to WLAN via the WPS-function

WPS-function

Connecting WLAN
automatically via the WPS
function
Selecting the WLAN
manually and conneting via
WPS
The MP 2500 R supports WPS for WLAN setup. WPS (Wi-Fi Protected Setup)
an easy process for establishing a secure WLAN connection. WPS can be used
to connect the MP 2500 R with your router in a quick and convenient way. For
that usage most modern routers have implemented the WPS function.

First activate the WPS-function of the Router or Repeater to which you
wish the MP 2500 R to be connected. For details please refer the manual
of the device in question.

Start the WPS-Autoconnect function of the MP 2500 R within 2 minutes.

Use the  /  buttons to select the menu point "WPS-
Autoconnect", then confirm your choice with the  button.

After the connection is established, the line "Status" shows the connected
WLAN network.

Finally select the "Store and exit?" menu point and press the 
button to accept the settings.
If the WPS function connects the MP 2500 R to the wrong WLAN, the preferred
WLAN can be also selected manually and only the authentication can be done
by the WPS function. The procedure is described in the following:

First activate the WPS-function of the Router or Repeater to which you
wish the MP 2500 R to be connected. For details please refer the manual
of the device in question.

First select the menu point "Scan for WLANs", and activate it by pressing
the  button.

A list of the WLANs found is displayed on the screen.

Use the  /  buttons to select the WLAN to which you wish
the MP 2500 R to be connected, and confirm your choice with the 
button
The window shown below will appear once the WLAN is selected:

Select the "Login" menu point and press the  button to activate it.
Now select the setting „Auto (WPS)" and confirm it with the 
button.

Now select the "Store and exit?" menu point and press the 
button.

After the connection is established, the line "Status" shows the connected
WLAN network.

Finally select the "Store and exit?" menu point and press the 
button to accept the settings.
55