Selecting Sources In An Integrated System; Operating The Sources In Detail; Operation With The Fm1000 Remote Control; Operation Of The Mp 2500 R With Controls On The Front Panel Of The Device - T+A MP 2500 R User Manual

Selecting sources in an integrated system

MP 2500 R in a system with
the PA 2x00
Operation with the FM1000
remote control
Operation of the MP 2500 R
with controls on the front
panel of the device
If the MP 2500 R is part of a system which includes a PA 2x00 R, and is
connected via the R2
directly using the FM1000's (handset supplied in the set) source select buttons
but by repeatedly pressing the  button on the FM2000 remote control
handset supplied with the PA 2x00 R, or using the source select menu, instead
of. Since the FM1000 and FM2000 handsets controls the whole system, the
handset's source select buttons are used to select the PA 2x00's sources when
it is part of a system.
This is the procedure for selecting the sources of the MP 2500 R using the
Source Select menu:

A long press on the FM2000's  button calls up the Source Select
menu: a list appears on the screen of the MP 2500 R showing the
currently active source.

Your chosen source can be selected using the  /  buttons,
then confirmed by pressing the  button.

The source list closes, and the system plays the source you have
selected.

The remote control handsets FM1000 and FM2000 supplied with the
MP 2500 R and the PA 2x00 R differ from each other only in the printing of the
source names. It is therefore quite possible to operate a system connected via
the R2Link connection with the FM1000. But nevertheless we recommend the
use of the FM2000.

Operating the sources in detail

The operation of the source devices is described in the following chapters using
the FM1000 remote control because only with this remote control all functions of
this device can be operated (e.g. adding favourites).
The front panel controls can be used to operate the basic functions of the
MP 2500 R.
The Navigation/Control rotary control (SELECT knob) can be used to navigate
through lists and menus or to control the CD player in the same way as the
cursor and OK buttons of the FM1000 remote.
In Lists

While playback: Rotating the SELECT knob returns to the list.

Choose a list or menu item by turning the SELECT knob.

By pressing the SELECT knob you can select an item or start playback of a
title or station.

A long press on the the SELECT knob leaves a submenu or navigates to the
parent menu level (BACK).
Playback control

Turning the SELECT knob lets you select a track.

When the desired track lights up on the display this track can be started by
pressing the SELECT knob.
connection, the MP 2500 R sources are not selected
Link
21