Table of Contents
Advertisement
Switching Radio Text on
and off
Mono / Stereo
(only FM – Radio)
DAB - Radio
Selecting DAB radio
Display
26
The Radio text function can be switched on and off by briefly pressing the
button on the remote control handset.
You can toggle the radio of the MP 2500 R between stereo and mono reception
by briefly pressing the button on the FM1000 or by a long press on the
button on the front panel of the MP 2500 R. The reception mode is
shown on the screen by the following symbols:
If the station you wish to listen to is very weak or very distant, and can only be
picked up with severe background noise, you should always switch to MONO
mode as this reduces the unwanted hiss significantly.
The Mono and Stereo symbols are only shown in the detailed screen display.
Briefly tap the button on the front panel of the MP 2500 R or the
button on the FM1000 remote control handset, repeatedly if necessary, until the
source "DAB Radio" is displayed on the screen.
Depending on the frequency band (block), it may take up to two seconds to switch
stations when in DAB mode.
Since firmware version V1.10 the device supports DAB+ reception via the Swiss
cable TV network. For further information about updating the firmware, please
refer chapter „Software update".
a) Displays the type of reception currently in use.
b) Hear the music type or style is displayed, e.g. Pop Music.
This information is only displayed if the transmitting station broadcasts it as
part of the RDS system. If you are listening to a station which does not
support the RDS system, or only supports it in part, these information fields
remain empty.
c) The frequency and / or the station name is displayed in enlarged form. If a
station name is displayed, its frequency is shown in area 'e'.
d) These lines display information which is broadcast by the station (e.g.
Radiotext).
e) Display of Stereo ''.
The field strength and therefore the reception quality to be expected from
f)
the set transmitting station can be assessed from the field strength.
g) Bit-rate of the broadcasting station when listening to DAB radio.
* The higher the bit-rate, the better the station's sound quality.
' ' (Mono) or '' (Stereo)
Advertisement
Table of Contents
