Reset To Default Values - Samson 3730-3 Mounting And Operating Instructions

5.10 Reset to default values

This function resets all parameters to the fac-
tory default values (see list of codes in sec-
tion 11).
Enable configuration:
→ Code 3 , press
Turn
→ ON , press
turn
After enabling:
→ Code 36 , press
Turn
→ RUN , press
turn
All parameters are reset and can be recon-
figured.
Default OFF
,
.
Default OFF
,
.
Start-up and settings
57
EB 8384-3 EN