Flying
Remote Trim Reset
If you are still having difficulty flying, it may help to reset the trim adjustments on the
remote. Do not attempt to do this while flying, safely land the craft first.
Press the Trim Reset button on the remote. The remote will chime once, and the lights on
the craft will blink rapidly. When the lights return to normal, the trim reset is complete.
Gyroscope Recalibration
If the craft is having difficulty flying or is behaving erratically, it's gyroscopes may need to
be recalibrated. Do not attempt to do this while flying, safely land the craft first, and place
it on a flat surface.
Note: The craft and the remote should already be linked together.
Pull down and to the right on both control sticks for 2-3 seconds. The remote will chime
once, and the lights on the craft will blink rapidly. When the lights return to normal, the
recalibration is complete.
12
Flight Controls
yaw
altitude
yaw
altitude
Left Stick
controls Altitude (throttle)
and Yaw (spin).
When You're Finished Flying
After landing, keep the Left Control Stick (throttle) in the lowest position and wait for the
rotors to stop spinning. Power OFF the remote BEFORE powering OFF the craft. This will
ensure that no signals are accidentally sent by the remote, reducing the chance of injury.
After this is done, it is safe to pick up and power OFF the craft.
pitch
roll
pitch
Right Stick
controls Pitch (forward/
backward) and Roll
(left/right).
13
roll