Parts & Repair; Parts Replacement; Rotor Replacement; Troubleshooting Troubleshooting Guide - sky rider X-11 Stratosphere User Manual

Quadcopter drone with wi-fi camera
Table of Contents

Advertisement

Parts & Repair
REMINDER: Pilots are responsible for any damage caused by improper use.

Parts Replacement

Standard parts such as extra batteries and remotes are available online for purchase when
in stock. However, any non-standard parts such as cameras, screws, bodies, etc. can be
ordered by placing an inquiry with our parts department at: partsinfo@dpiinc.com.

Rotor Replacement

The craft comes with replacement rotors if the originals are broken or badly damaged. Use
the included screwdriver to remove the rotor retaining screw that holds the rotor to the
motor shaft. Once the retaining screw is out, pull upwards on the rotor to remove it from
the motor shaft. Installation of the new rotor is the reverse of the removal process. Be sure
to tighten the rotor retaining screw firmly, but do not over tighten.
It is extremely important to use the correct rotor (A or B) for replacement. Using the
incorrect rotor will make the craft impossible to control. The marking can be found on the
rotor near the shaft.
Rotor B
Rotor A
Rotor A
Rotor B
22
Troubleshooting
Troubleshooting Guide
PROBLEM
POSSIBLE CAUSES
Craft does not
• No power to remote
or craft.
respond to controls.
• Poor contact between
power plugs.
• Craft is out of range.
Craft is difficult
• Gyroscopes may
be misaligned.
to control or flies
erratically.
Craft drifts
• Trim not set or needs
adjustment.
while in flight.
Craft suffers from
• Damage to body,
rotors or other major
mechanical trouble.
components.
LED lights ON but
• Low battery power.
craft does not
respond to controls.
SOLUTION
• Check remote batteries,
replace if needed.
• Check craft battery, be
sure it is fully charged.
• Be sure the power plugs
are firmly connected.
• Be sure the remote has
an unobstructed line of
sight to the craft.
• Remain within the
remote's 328 ft. range.
• Power OFF remote and
craft and reconnect
(see pg. 10).
• Adjust trim settings
(see pg. 12).
• Repair or replace parts
as needed.
• Recharge the battery.
23

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Drw311

Table of Contents