Assembly
Rotor Guards
Attach each rotor and rotor guard as shown, using the included small screws
and then tighten in the center location using the included screwdriver.
Legs
Place each leg on the underside of the craft as shown in the figure below.
6
Remote Control
Functions
1
9
8
7
1. Left Control Stick
Ascend: Push forward.
Descend: Push backward.
Yaw/Spin: Push left or right.
2. Power Switch
3. Right Control Stick
Pitch: push forward/backward
Roll/Bank: push left/right.
2
3
4
5
6
4. "Pitch" Trim
5. "Roll/Bank" Trim
6. 360° Flip
7. Trim Reset
8. Speed Setting (slow, medium, fast).
9. Headless Mode
7