Using The Remote & App Together; 3D Mode - sky rider X-11 Stratosphere User Manual

Sky Rider Cruise App
Using the Remote & App Together
It can be easier to capture photos and video by using the remote to fly the drone and using
the app in a viewing only method. Use the app and the remote together by attaching the
smartphone holder (included) to the remote and placing your phone in the holder.
Follow the steps below to connect to the remote and the app in the proper sequence.
• First, connect the remote to the craft like normal. Connecting the remote first
overrides any control signals from the app.
• Next, use your phone to connect to the craft's Wi-Fi. Open the app and go to the Flight
Screen. Leave the Flight Controls off for the best view from the drone's camera.
• Use the controls on the remote to fly the craft while the Wi-Fi camera streams to
your phone.
• When you're finished flying, power down the remote and craft like normal.
To release pull
upwards on the
holder.
20

3D Mode

VR Mode splits the phone's screen for use in a VR headset. Press the 3D button on the
screen to turn this feature ON or OFF. Use VR Mode to give a friend a fully immersive, point-
of-view flying adventure.
NOTE:
• On screen flight controls are locked out in VR Mode. You must have the regular remote
connected in order to fly the craft.
• We do not recommend flying the craft while wearing a headset. The craft's
camera has a limited forward view and the headset will completely obscure the
user's peripheral vision and situational awareness. Pilots assume all risk and are
responsible for any damage caused by improper use.
21