Remote Control
Battery Installation
x3 AA batteries
A
A
A
A
A
A
8
Charging the Battery
Information & Procedure
The craft's battery must be charged before it can be flown. To avoid risk of injury or damage,
be sure the craft and remote control are both powered OFF and remove the battery
from the craft when charging. Charging time is approximately 120 minutes. Charge fully
before use for best performance. Connect the battery plug to the USB charging plug, then
connect the USB end (included) to the USB port of a powered ON computer or USB power
adapter (not included).
While charging, the cable will display a red light.
When charging is complete, the light will turn OFF.
Be sure to correctly match the plug to
the charging port or damage may occur.
REMINDER: Do not charge overnight. Do
not leave unattended while charging.
Remove the battery from the
bottom of the craft.
9