Measuring Blood Pressure - ETEKCITY TMB-1583-BS User Manual

Using the Blood Pressure Monitor (Cont.)

Measuring Blood Pressure

1. When the monitor is off, press
on the monitor and it will automatically begin
measuring.
2. Relax and avoid moving or talking while
measuring. When the measuring is finished,
the results will display.
3. The monitor will automatically transmit your
results to the VeSync app. The Bluetooth symbol
will show on the display while this is happening.
Note: If data transmission fails, the display
will show "!". This will disappear when data
transmission succeeds.
4. Wait 3 minutes before taking a second
measurement, if necessary. This allows your
blood circulation to recover.
32
Note:
• Press
. This will turn
• If the cuff causes any increased discomfort,
• After taking a measurement and seeing the
• Do not pull on the air hose to disconnect from
at any time to stop measuring.
immediately press
monitor.
reading, press to turn off the monitor. If
you do not, it will turn off automatically after
2 minutes of inactivity. You can change this
time setting in the VeSync app.
the air port. Only use the air plug to connect
or disconnect the arm cuff.
to turn off the