ETEKCITY TMB-1583-BS User Manual page 11

by retesting at least the requirements in
the limits of the error of the cuff pressure
indication and air leakage (testing at least at
50 mmHg and 200 mmHg).
• Please dispose of ACCESSORIES,
detachable parts, and the ME EQUIPMENT
according to the local guidelines.
• The manufacturer will make available on
request circuit diagrams, component part
lists, descriptions, calibration instructions,
etc., to assist service personnel in parts
repair.
• The plug/adapter plug pins insulate the
monitor from the main power supply. Do
not position the monitor in a position where
it is difficult to disconnect from the supply
mains to safely terminate operation of ME
equipment.
• The person operating this device shall not
touch the output of the batteries/adapter
and the patient simultaneously.
• Cleaning: Dust may affect the performance
of the unit. Use a soft cloth to clean every
part of the monitor and cuff before and
after use. Do not use any abrasive or volatile
cleaners.
• The monitor does not need to be calibrated
within two years of reliable service.
• If you have any problems with this monitor,
such as setting up, maintaining, or using,
please contact Customer Support
page 55). Don't open or repair the monitor by
yourself in the event of malfunctions. This
device must only be serviced, repaired, and
opened by individuals at authorized sales/
service centers.
• Please contact Customer Support
if any unexpected operation or events occur.
• Keep out of reach of infants, young children,
and pets to avoid inhalation or swallowing of
small parts. This is dangerous or even fatal.
• Be careful to avoid strangulation due
(see
(page 55)
11