ETEKCITY TMB-1583-BS User Manual page 12

to cables and hoses, particularly due to
excessive length.
• At least 30 min are required for ME
equipment to warm from the minimum
storage temperature between uses until it is
ready for intended use. At least 30 min are
required for ME equipment to cool from the
maximum storage temperature between
uses until it is ready for intended use.
• Wireless communications equipment
such as wireless home network devices,
mobile phones, cordless telephones and
their base stations, and walkie-talkies
can affect this monitor and should be
kept at least a distance "d" away from the
equipment. Distance "d" is calculated by
the MANUFACTURER from the 80MHz to
5.8GHz column of Table 4 and Table 9 of IEC
60601-1-2, as appropriate.
• Only use ACCESSORIES and detachable
parts specified/authorized by the
MANUFACTURER. Using other parts or
12
accessories may cause damage to the
monitor or danger to the users/patients.
• There are no luer lock connectors used in
the construction of tubing. If there were,
there is a possibility that they might be
inadvertently connected to intravascular fluid
systems, allowing air to be pumped into a
blood vessel.
• Please use the monitor in the environment
which is provided in the user manual.
Otherwise, the performance and lifetime of
the monitor will be impacted and reduced.
• This monitor is not intended for public use.
Household use only.