ETEKCITY TMB-1583-BS User Manual page 10

avoid using in the presence of a strong
electromagnetic field radiated interference
signal or an electrical fast transient/burst
signal.
• The blood pressure monitor, its adapter,
and the cuff are suitable for use within the
patient environment. If you are allergic to
polyester, nylon or plastic, please don't use
this monitor or cuff.
• During use, the patient will be in contact
with the cuff. The materials of the cuff
have been tested and found to comply
with requirements of ISO 10993-5 and ISO
10993-10. It will not cause any potential
sensitization or irritation reaction.
• The included adapter is specified as
ME EQUIPMENT.
• If you experience discomfort during a
measurement, such as pain in the arm or
other complaints, press
immediately from the cuff. Loosen the cuff
and remove it from your arm.
10
•
•
•
•
to release the air •
If the cuff pressure reaches 40 kPa / 300
mmHg, the cuff will automatically deflate.
Should the cuff not deflate when pressure
reaches 40 kPa / 300 mmHg, detach the
cuff from the arm and press
inflation.
Before use, make sure the monitor and
accessories function safely and are in proper
working condition. Do not use the monitor or
accessories if they are damaged in any way.
The continuous use of a damaged monitor
or damaged accessories may cause injury,
improper results, or serious danger.
Do not wash the cuff in a washing machine
or dishwasher.
The service life of the cuff may vary based
on the frequency of washing, skin condition,
and storage state. The typical service life is
10,000 times used.
We recommend that the performance of the
monitor and cuff should be checked every
2 years and after maintenance and repair,
to stop