Table of Contents
Advertisement
WASHING PROCEDURE
PRECAUTIONS
Remove ignition key and seal the ignition key barrel
slot using adhesive tape.
Please remove tool kit, first aid kit and other
relevant documents if any inside the right side
panel before proceeding for washing of the
motorcycle.
Cover the silencer tail pipe, horn and control
switches with suitable plastic bags and tie if firmly
to prevent water entry.
Wash the motorcycle only when the engine is in
cold condition.
Do not remove side panel while washing to avoid
water entry.
Brush engine area with a recommend non corrosive
solvent to remove dirt or grease.
Use low pressure water jet to clean.
Never spray water with great force on head lamp,
speedometer, tripper/badge, flasher lights, front
and rear wheel hubs, electrical connections and
wires, control cables, cables, spark plug, battery,
EMS ECU, side mirrors, steering stem etc.
Do not use high pressure washers or steam jet
cleaners near the seal of headstock bearing or
steering stem bearing, seal of wheel bearing, brake
calipers, air intakes & exhaust outlets.
Do not apply any corrosive solvent on painted sur-
faces or rubber parts.
Royal Enfield All New Classic 350
79
Advertisement
Table of Contents
