D-Link DSL-G225 Setup Manual
Bridge mode
Hide thumbs
Also See for DSL-G225:
- Quick installation manual (8 pages) ,
- Installation manual (1 page) ,
- User manual (149 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for D-Link DSL-G225
Summary of Contents for D-Link DSL-G225
- Page 1 How to setup the DSL-G225 in Bridge Mode...
- Page 2 This guide is for DSL-G225 with firmware ver. 1.04. Before proceeding with this setup please set your computer temporarily with a static IP address from 192.168.1.x range (e.g. 192.168.1.99): Open your Internet browser e.g. Internet Explorer, Firefox, Chrome, Safari, etc. and enter the IP address of your D- Link modem in the address bar: http://192.168.1.1.
-
Page 3: Setup Using The Setup Wizard
Setup using the Setup Wizard Step 1. After logging into the modem’s configuration pages, go to SETUP > Local Network. Un-check the “Enable DHCP Server” option. Click on Save/Apply. Support – How to setup DSL-G225 in Bridge Mode D-Link Technical Page 3 of 11... - Page 4 Step 2. Go to SETUP > Wizard > click on the “Setup Wizard” button. Follow the steps in the Setup Wizard. Support – How to setup DSL-G225 in Bridge Mode D-Link Technical Page 4 of 11...
- Page 5 Choose ADSL or VDSL, depending on the type of technology used for your Internet connection. Set Protocol to “Bridge”. It is recommended to disable the modem’s Wi-Fi: Support – How to setup DSL-G225 in Bridge Mode D-Link Technical Page 5 of 11...
- Page 6 Click on “Save/Apply” to finish the Setup Wizard. The setup is complete. Support – How to setup DSL-G225 in Bridge Mode D-Link Technical Page 6 of 11...
-
Page 7: Manual Setup
Manual Setup Step 1. After logging into the modem’s configuration pages, go to SETUP > Local Network. Un-check the “Enable DHCP Server” option. Click on Save/Apply. Support – How to setup DSL-G225 in Bridge Mode D-Link Technical Page 7 of 11... - Page 8 Choose ADSL or VDSL, depending on the type of technology used for your Internet connection. Click on “Add”. Set Protocol to “Bridging” and click on Next. Support – How to setup DSL-G225 in Bridge Mode D-Link Technical Page 8 of 11...
- Page 9 Click on “Apply” to finish the setup. The modem setup is complete. Support – How to setup DSL-G225 in Bridge Mode D-Link Technical Page 9 of 11...
- Page 10 Please note that in Bridge Mode the DSL-G225 modem acts as a transparent device. If your Internet provider requires PPPoE authentication or VLAN tagging, you need to enable these options on the device connected to the LAN port of the DSL-G225 modem.
- Page 11 The computer behind the DSL-G225 in Bridge Mode obtains public IP address from the ISP: Support – How to setup DSL-G225 in Bridge Mode D-Link Technical Page 11 of 11...