Touchpad - HP Pavilion x360 Service Manual

TouchPad

NOTE: The TouchPad spare part kit does not include the TouchPad bracket or TouchPad cable. The TouchPad
bracket is available using spare part number 924385-001. The TouchPad cable is available using spare part
number 924275-001.
Description
In ash silver finish
In Pike silver finish
Before removing the TouchPad, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
Remove the TouchPad:
1. Turn the keyboard/top cover upside down with the front toward you.
2. Remove the three Phillips PM2.0×2.9 screws (1) that secure the TouchPad bracket to the keyboard/
top cover.
3. Lift the right side of the TouchPad bracket (2) until it rests at an angle.
4. Remove the TouchPad bracket by sliding it up and to the right at an angle.
Keyboard/top cover on page
Spare part number
924295-001
924296-001
33).
Component replacement procedures 39