Changing The Boot Order Using The F9 Prompt - HP Pavilion x360 Service Manual

14m convertible pc

Hide thumbs Also See for Pavilion x360:

Table of Contents

NOTE:

any software updates, especially system BIOS updates.

BIOS installation procedures vary. Follow any instructions that are revealed on the screen after the download

is complete. If no instructions are revealed, follow these steps:

Type file in the taskbar search box, and then select File Explorer.

Select your hard drive designation. The hard drive designation is typically Local Disk (C:).

Using the hard drive path you recorded earlier, open the folder that contains the update.

Double-click the file that has an .exe extension (for example, filename.exe).

The BIOS installation begins.

Complete the installation by following the on-screen instructions.

NOTE:

After a message on the screen reports a successful installation, you can delete the downloaded file

from your hard drive.

Changing the boot order using the f9 prompt

To dynamically choose a boot device for the current startup sequence, follow these steps:

Access the Boot Device Options menu:

●

Computers or tablets with keyboards:

▲

●

Tablets without keyboards:

▲

Select a boot device, then press enter.

Chapter 6 Computer Setup (BIOS), TPM, and HP Sure Start

If you connect your computer to a network, consult the network administrator before installing

Turn on or restart the computer, and when the HP logo appears, press

Device Options menu.

Turn off the tablet. Press the power button in combination with the volume down button until

the Startup menu is displayed, and then tap F9 to enter the Boot Device Options menu.

to enter the Boot

Table of Contents