Advertisement
Quick Links
Advertisement
Related Manuals for Brickcom FB-300Np-V5
Summary of Contents for Brickcom FB-300Np-V5
- Page 1 Easy Installation Guide Megapixel Day & Night Fixed Box Network Camera FB-Series English...
- Page 2 Step 1. Check Package Contents b. CS mount Lens (Optional) Network Camera c. Product CD d. Camera Stand e. Warranty Card f. A/V Cable (FB-500A Series &FB-300N series) g. Power Adapter (Optional) h. Easy Installation Guide...
- Page 3 j. C Mount Ring Allen Key (FB-500A Series &FB-300N series)
-
Page 4: Step 2.Hardware Installation
Step 2.Hardware Installation Mounting the CS-Mount Lens to the Camera <Vari-focal Lens with Manual Iris> --- Optional Lens Connect the CS-mount lens to the camera by turning it clockwise onto the camera mount until it stops. If necessary, adjust the iris controller, focus controller, and zoom controller to get the best resolution. To adjust the lens: Adjust the iris ring controller to control the amount of light coming through the lens. - Page 5 <Vari-focal Lens with Auto Iris> --- Optional Lens Connect the CS-mount lens to the camera by turning it clockwise onto the camera mount until it stops. If necessary, adjust focus controller, and zoom controller to get the best resolution. ra side connector. Connect the lens cable plug (DC Iris control cable) to the came To adjust the lens: The zoom controller can be manually adjusted to control the zoom factor on the camera.
- Page 6 Connect the A/V Cable to the monitor. Step 3.Camera Connection Basic Connection (Without PoE) To attach external devices, such as sensors and alarms, connect them to the extension I/O terminal block. Connect the camera to a switch using an Ethernet cable. Connect the supplied power cable to the camera and plug it into a power outlet.
- Page 7 When powering up, the power LED will light up and the camera will boot up. The link LED will be an illuminate as amber when obtaining the IP address. After obtaining the IP address, the link LED will flash orange while the network connection is processing.
- Page 8 2. Use a standard RJ-45 cable to connect the PoE Injector to the non-PoE switch. 3. Use a standard power cable to connect the PoE Injector to a power outlet. Complete the Installation Step 4.Install the EasyConfig Software Insert the CD into the CD-ROM, and follow the instructions of the InstallShield Wizard to finish installation.