Troubleshooting - Godox TT685II-S User Manual

Power Supply
Power source
Recycle time
Full power flashes
Power saving
Sync Triggering Mode
Sync Triggering Mode
Working temperature
Dimensions
W x H x D
Weight without battery
Weight with battery
2.4G Frequency Range
Max. Transmitting Power

Troubleshooting

If there is a problem, refer to this Troubleshooting Guide.
The Camera Flash does not fire.
The camera flash is not attached securely to the camera.
Attach the camera's mounting foot securely to the camera.
•
The electrical contacts of the Camera Flash and camera are dirty.
Clean the contacts.
•
The power turns off by itself.
After 90 minutes of idle operation, auto power took effect if the flash is set as
Transmitter.
Press the shutter button halfway or press any flash button to wake up.
•
After 60 minutes (or 30 minutes) of idle operation, the flash unit will enter sleep mode if
it is set as Receiver.
Press any flash button to wake up.
•
NI-MH battery (recommended) or LR6
alkaline battery*4
0.1-2.6s (Rechargeable Ni-MH Battery)
About 290 times
Power off automatically after approx. 90
seconds of idle operation. (60 minutes if
set as Receiver)
Hotshoe, 2.5mm sync line
-10°C -50°C
64*76*190mm
405g
489g
2413.0MHz-2465.0MHz
5dbm
32