Advertisement
Quick Links
Godox
Thinklite TTL Camera Flash
TT685IIC
5D Mark III 5D Mark
6D 7D 60D 50D 30D 600D
500D
II
- 25 -
Thank you for purchasing this product.
This TT685IIC camera flash applies to Canon EOS series cameras
and is compatible with E-TTL II autoflash. With this E-TTL II
compatible flash, your shooting will become simpler. You can
easily achieve a correct flash exposure even in complex
light-changing environments. This camera flash features:
●Approx. GN60 (m ISO 100, @200mm), 81 steps from 1/1 to 1/128.
●Fully support Canon E-TTL II camera flash. Workable as
Transmitter or Receiver unit in a wireless flash group.
●Use dot-matrix LCD panel to make clear and convenient
operations.
●With built-in 2.4GHz wireless remote system to support
transmitting and receiving.
●Provided multiple functions, include HSS (up to 1/8000s), FEC,
FEB, etc.
●Stable consistency and color temperature with good even
lighting.
●Support with firmware upgrade.
Always keep this product dry. Do not use in rain or in damp
conditions.
Do not disassemble. Should repairs become necessary, this
product must be sent to an authorized maintenance center.
Keep out of reach of children.
Stop using this product if it breaks open due to extrusion, falling
or strong hit. Otherwise, electric shock may occur if you touch
the electronic parts inside it.
Do not fire the flash directly into the eyes (especially those of
babies) within short distances. Otherwise visual impairment
may occur.
Do not use the flash unit in the presence of flammable gases,
chemicals and other similar materials. In certain circumstance,
these materials may be sensitive to the strong light emitting
from this flash unit and fire or electromagnetic interference may
result.
Do not leave or store the flash unit if the ambient temperature
reads over 50℃. Otherwise the electronic parts may be
damaged.
Turn off the flash unit immediately in the event of malfunction.
Conventions used in this Manual
●This manual is based on the assumption that both the camera and
camera flash's power switches are powered on.
●Reference page numbers are indicated by "p.**".
●The following alert symbols are used in this manual:
The Caution symbol indicates a warning to prevent shooting problem.
The Note symbol gives supplemental information.
- 26 -
Advertisement
Related Manuals for Godox TT685IIC
Summary of Contents for Godox TT685IIC
- Page 1 Godox Thinklite TTL Camera Flash Thank you for purchasing this product. This TT685IIC camera flash applies to Canon EOS series cameras and is compatible with E-TTL II autoflash. With this E-TTL II TT685IIC compatible flash, your shooting will become simpler. You can easily achieve a correct flash exposure even in complex light-changing environments.
- Page 2 Warning Name of Parts Body Control Panel Dot-matrix LCD Panel LCD Panel in Three Modes What's in the Box of TT685IIC Kit? Separately Sold Accessories Attaching to a Camera Power Management Flash Mode — E-TTL Autoflash FEC (Flash Exposure Compensation)
-
Page 3: Lcd Panel
● 2.4G Radio Transmission: As a Receiver Unit Manual flash output (3)Multi Flash Multi : Stroboscopic flash ● What’s in the Box of TT685IIC Kit? Number of flashes Flash frequency (4) Radio Transmission Shooting ● Transmitter Unit (TX) Instruction Manual Flash mode ●... - Page 4 ● Loading and Unloading the Battery To unload the battery, hold down the battery and press This flash has three flash modes: E-TTL, Manual (M), and Multi compartment and push the (Stroboscopic). In E-TTL mode, the camera and the flash will work battery downwardly to take it together to calculate the correct exposure for the subject and the background.
- Page 5 Press function button 3 ● If the subject is too far away and underexposure, the < > < >. The icon < > icon will blink in the viewfinder. Move closer to the subject and the exposure bracketing and try the FE lock again. amount will be highlighted ●...
- Page 6 The flash output is adjustable from 1/1 full power to 1/256th power With stroboscopic flash, a rapid series of flashes is fired. It can be in 1/10th stop increments. To obtain a correct flash exposure, use used to capture a multiple images of a moving subject in a single a hand-held flash meter to determine the required flash output.
- Page 7 Positioning and Operation Range (Example of wireless flash shooting) ● Autoflash Shooting with One Receiver Unit Flash output TRANSMITTER RECEIVER 1/16 1/32 Transmission distance is about 100m. 1/64 1/128 1/256 ● Use the supplied mini stand to position the Receiver unit. Flash ●...
-
Page 8: Setting The Communication Channel
● Shooting with a Different Flash Mode set for Each Group 3. Setting the Communication Channel If there are other wireless flash systems nearby, you can change the channel IDs to prevent signal interference. The channel IDs of the Transmitter unit and the Receiver unit(s) must be set to the same. - Page 9 Transmitter Unit Setting Using Automatic Wireless Flash with Multiple Receiver Units ●Attach a TT685IIC camera flash on the camera and set When stronger flash output or it as the Transmitter unit. more convenient lighting ●X1T-C can also be used operation is needed, increase the as Transmitter unit.
- Page 10 7. M: Wireless Flash Shooting with Manual Flash The Reason & Solution of Not Triggering in Godox 2.4G This describes wireless (multiple shooting) using manual flash. Wireless You can shoot with a different flash output setting for each Receiver unit (firing group). Set all parameters on the Transmitter 1.
- Page 11 In Manual Zoom mode, press the <ZOOM> button. ● Turn the Select Dial to change the flash coverage. ● If < > is displayed, the flash coverage will be set automati- cally. If you set the flash coverage manually, make sure it covers the lens focal length so that the picture will not have a dark periphery.
- Page 12 LCD contrast ratio 7 levels - ~+ FEB auto FEB ACL cancel 1. Over-Temperature Protection ● To avoid overheating and deteriorating the flash head, do not fire Transmitter more than 30 continuous flashes in fast succession at 1/1 full unit control power.
- Page 13 →Attach the camera’s mounting foot securely to the camera. ● The electrical contacts of the Camera Flash and camera are dirty. →Clean the contacts. Model TT685IIC ● < > or < > is not displayed in the view finder of camera. Compatible Cameras Canon EOS cameras (E-TTL II autoflash) →Wait until the flash is fully recycled and the flash ready...
- Page 14 (1) This device may not ●As the firmware upgrade needs the support of Godox G3 cause harmful interference, and (2) this device must accept any software, please download and install the "Godox G3 firmware interference received, including interference that may cause upgrade software"...