Technical Data; Troubleshooting - Godox V1Pro C Manual

Number of flashes that will activate over-temperature protection in HSS
mode:
Power Output Level
1/1
1/2 (+0.1~+0.9)
1/4(+0.1~+0.9)
1/8(+0.1~+0.9)
1/16(+0.1~+0.9)
1/32(+0.1~+0.9)
1/64(+0.1~+0.9)
1/128(+0.1~+0.9)
1/256(+0.1~+0.9)

Technical Data

Model V1Pro C
Compatible Cameras Canon EOS cameras (E-TTL II auto flash)
Power(1/1output) 76Ws
Flash Coverage 28 to 105mm
• Auto zoom (flash coverage is set automatically to
match the lens focal length and image size)
• Manual zoom
• Swinging/tilting flash head (bounce flash): 0 to
330° horizontally and -7° to 120° vertically
Flash Duration 1/300 to 1/20000 seconds
Exposure Control
Exposure Control System E-TTL II auto flash and manual flash
Flash Exposure Manual, FEB: ±3 steps with 1/3 increment each step
Compensation (FEC) (Manual FEC and FEB can be combined)
Flash Exposure Lock (FEL) With <FEL> button or<*> button
Sync Mode High-speed sync (up to 1/8000 seconds), first-
curtain sync, and second-curtain sync
Multi Flash Provided (up to 100 times, 199Hz)
Wireless Flash (Radio 2.4G Transmission)
Wireless Function Transmitter, Receiver, Off
Transmitter Unit Groups A, B, C, D
Controllable Receiver A, B, C, D, E (E group can be controlled by X series
Groups flash trigger)
Transmission Range 100m
(approx.)
Channels 32 (01~32)
ID OFF/01~99
Modeling Flash Fired with camera's depth-of-field preview button
Auto Focus Assist Beam
Effective Range (approx.) Center: 0.6~10m / 2.0~32.8 feet
Periphery: 0.6~5m / 2.0~16.4 feet
LED Modeling Lamp
Power 2w
Color Temperature 3300K±200K
Power Supply
Built-in Lithium Battery 7.2V/2980mAh
Recycle Time Approx. 1.3 seconds. Green LED indicator will light
up when the flash is ready.
Number of Flashes at 1/1 Approx. 500
step
Number of Flashes
60
70
100
100
100
100
100
100
100
50
Power Saving Power off automatically after approx. 90s of idle
use when set as a transmitter unit.
Screen sleep automatically after approx. 60min (or
30min) of idle use when set as a receiver unit.
Sync Triggering Mode Hot shoe, 2.5mm sync cord
Dimension
W x H x D 6.14''×2.99''×4.88''
Net Weight Without Battery 466g
Net Weight With Battery 580g
Specifications and data may subject to changes without notice.

Troubleshooting

If there is a problem, refer to this troubleshooting guide.
The camera flash does not fire.
The camera flash is not attached securely to the camera.
Attach the camera's mounting foot securely to the camera.
The electrical contacts of the camera flash and camera are dirty.
→ Clean the contacts.。
< >or< > is not displayed in the view finder of camera.
→ Wait until the flash is fully recycled and the flash ready indicator lights up.
→ If the flash ready indicator lights up, but< >or<
view finder, check whether this flash unit is securely attached to the camera
hot shoe.
→ If the flash ready indicator does not light up after a long wait, check
whether the battery power is enough. If the battery power is low, < > will
appear and blink on the LCD panel. Please replace the battery immediately.
The power turns off by itself.
After 90 seconds of idle operation, auto power off took effect if the flash is
set as a transmitter unit.
→ Press the shutter button halfway or press any flash button to wake up.
After 60 minutes (or 30 minutes) of idle operation, the flash enter sleep
mode if it is set as receiver unit.
→ Press any flash button to wake up.
Auto zoom does not work.
The camera flash is not attached securely to the camera.
→ Attach the camera flash's mounting foot to the camera.
The flash exposure is underexposed or overexposed.
There was a highly reflective object (e.g. glass window) in the picture.
→ Use FE lock (FEL).
You used high-speed sync.
→ With high-speed sync, the effective flash range will be shorter. Make sure
the subject is within the effective flash range displayed.
You used manual flash mode.
→ Set the flash mode to ETTL or modify the flash output.
Photos have dark corners or only parts of the target subject are
illuminated.
The focal length of lens exceeds the flash coverage.
→ Check the flash coverage you set. This flash unit has the flash coverage
between 28 and 105mm, which fits medium-format cameras.
>is not displayed in the
51